Why S.M.A.R.T. is so d.u.m.b?

This article is intended to provide insight into problems encountered by management applications that use S.M.A.R.T. reporting capabilities of SATA SSD’s, and other device types that provide a translation such as the Micron P420m/P320h devices.  SSD’s and HDD’s have supported S.M.A.R.T. reporting for many years, and are still a critical part of any storage solution. SSD’s introduce new requirements to an old standard; specifically lifetime and how to know when your drive should be replaced.

I’m going do cover the problem with SMART reporting from three different perspectives 1) the “standard”, 2) a device manufacturer, and 3) system software (driver) perspective.

S.M.A.R.T. stands for Self-monitoring, Analysis, and Reporting Technology.  The last version of this specification can be found on T13.org web site at: http://www.t13.org/documents/UploadedDocuments/docs2007/D1699r4a-ATA8-ACS.pdf

Lots of intricate details and other opinions around SMART reporting can be found online.  I found wikipedia’s description to be very informative: wikipedia at http://en.wikipedia.org/wiki/S.M.A.R.T.

Topics covered in this article:

  • SMART Attributes – what are they?
  • PCIe SSD’s and SMART
  • Software Interfaces for SMART Reporting
  • How do we fix this?

SMART Attributes – what are they?

In its most simple form SMART reporting is a mechanism to request from an ATA storage device, such as a SATA SSD, a 512-byte data structure that contains a collection of SMART attributes.  There are a finite number of attributes available in 512-bytes, and a SMART attribute is 3 field structure representing the following:

  1. Attribute Id:  which attribute (from the ATA specification) is being reported in the Value and Threshold fields.
  2. Value: a value from 0 to 255 representing a range of possible values reported by the device.
  3. Threshold: an OPTIONAL value from 0 to 255 representing an event threshold, where if exceeded, the device will change its operating specification according to the rules of the ATA specification for SMART reporting.

The existence of an optional Threshold field represents a mechanism to change the threshold and a mechanism to signal a driver when SMART event occurs, but the specification describes the Threshold as an optional feature for device manufacturers to implement.

You may find this hard to believe but SMART reporting is NOT a standard.  It is a specification for doing something but it doesn’t specify the what or the how in a way that ensures device manufacturers and OEM’s report these SMART attributes in a consistent form with consistent behaviors.  To make matters worse OEMs have had to define their own standards for device vendors to conform to their management specifications. Some OEMs have adopted open standards on how to collate, present and maintain management data; of which SMART Attributes are a tiny fraction of the total management data set.

Its important to note that SMART was introduced for spinning media in the 1990’s and adopted by SSD manufacturers in the mid 2000’s to support new problems that arise with Flash memory as the storage technology.  Also, the last known edit to the ATA/ATAPI-8 specification was made in 2007, and if you read the first few lines of the specification it should become even more apparent the challenges facing a device manufacturer:

This is a draft proposed American National Standard of Accredited Standards Committee INCITS. As such this is not a completed standard. The T10 Technical Committee may modify this document as a result of comments received during public review and its approval as a standard. Use of the information contained here in is at your own risk.

You may be asking yourself, “what drives a device manufacturer’s requirements for SMART reporting?”  The answer is simple, OEM storage specifications and requirements.

The problem is twofold, first, OEM’s have defined their own proprietary definition of which attribute identifiers and their values mean. Oh, and between OEMs the attribute id values can be different. In reality there are only a few attributes we care about that have differing attribute identifiers. For better illustration of what I mean, see the example below. As a result, device vendors must then SKU their products (usually firmware) for specific OEMs for the sole purpose of supporting SMART reporting in different management tools.  The second problem, is that device vendors must also decide what level of the SMART Reporting feature set that they support; should they support all Thresholds, or only some?  Typically decisions as simple as SMART attributes are made very late in product development such that it is too late to map “internal” flash statistics properly, sometimes leading to short cuts for these types of features.

Example of some of the more interesting SSD attribute mappings:

  • PROGRAM FAIL COUNT: these are errors corrected by the device.
    • Specification ID: #171
    • OEM A ID: #181
  • ERASE FAIL COUNT: these indicates that blocks are being or will soon be retired.
    • Specification ID: #172
    • OEM A ID: #182
  • TEMPERATURE: current operating temperature, good to know if your chassis has enough cooling.
    • Specification ID: #194
    • OEM A ID: (same id)
  • PERCENT LIFETIME USED: amount of lifetime calculated by the drive, not guessed by an end user.
    • Specification ID: #202
    • OEM A ID: #204


What is a PCIe SSD?  A PCIe SSD is an SSD in which the HBA and storage device are integrated together onto a single board, exposed on a PCI Express bus; directly connected to the host CPU or main IO bus.  I will clarify what I mean by storage device after I describe what I mean by HBA.  The key point here is that a PCIe SSD is two devices in one, and require a device driver to

What is a Host Bus Adapter (HBA)?  The most familiar HBA example in our everyday computers and laptops are based on the main chipset implementation of AHCI (Advanced Hardware Controller Interface).  AHCI is Intel’s gift to cheap storage for us all.  You must keep in mind that even though we don’t see it or install its hardware in our computers, it is actually a PCIe device that we are plugging our SATA drives into.  In enterprise computing there are a few more players than Intel, of course Intel is one of them and their architectures include SCSI devices as well as SATA devices (Serial-ATA).  Enterprise HBA implementations are all proprietary to each device manufacturer, and how each manufacturer exposes SMART reporting is unique to their device drivers more so than hardware.

What is a storage device?  A SATA SSD is one example of a storage device.  A SATA SSD consists of a SATA controller and a Flash controller operating together to store and retrieve data on Flash media, instead of spinning (HDD) media.  In the case of a PCIe SSD, the storage device consists of a single component instead of two, a Flash controller.  The Flash controller performs the low-level Flash read/write and management operations that are common in all SSD’s.

The first standard for PCIe SSD’s is called NVME (Non-Volatile Memory Express).  Until version 1.0 of the NVME specification, all PCIe SSD’s were proprietary.  The Micron P420m and P320h PCIe SSD’s are a prime example of a custom and proprietary HBA and Flash controller based storage device.  Since neither SATA, nor SAS are part of the design of the PCIe SSD, the implementation of SMART reporting must be provided by and translated by the device driver and/or management software.

Non-standard PCIe SSD’s have the additional problem of translating internal device details into something meaningful to management interfaces that are designed for SATA SMART reporting.  Sometimes, the device implementation doesn’t even remotely have an equivalent mechanism for reporting a SMART attribute.  One example would be total bytes written, which is a common lifetime measurement for SSD endurance.  In the case of the Micron P420m and P320h SSD’s the lifetime calculation of the device is a much more complex answer than simple “total bytes written”.  It turns out that you can, depending on your write workload and frequency of writes, write to some SSD’s beyond their rated “total bytes written”.  If a drive were to report “total bytes written” as it’s lifetime indicator it could be misleading and costly if the management software uses only that statistic to determine when a drive should be replaced.  For that reason the P420m and P320h SMART reporting reports a percentage of lifetime value, once it reaches 100%, the drive will enter a write protect mode to allow users to read data off the drive safely, and will dis-allow writes to prevent corruption of user data due to stress on the already strained flash subsystem.

Software Interfaces for SMART Reporting

Device drivers are responsible for presenting user space management applications with access to device data. Operating systems dictate the mechanism for kernel drivers to expose user space functions. In Windows and Linux it is commonly made available via IOCTL, a single entry point with a command code and memory buffer for command parameters; with no standard for parameters or IOCTL code. Linux has some nice facilities for creating “proc” and “sysfs” nodes that can be queried by command line tools and scripts through standard file read / write operations. VMware has two mechanisms depending on the version of the vsphere hypervisor, IOCTL and “proc” for versions 4.1 through 5.1; a.k.a. VMK Linux kernel. For version 5.5 and beyond, IOCTL and “proc” are removed and a special management API is introduced. The interface is much different from IOCTL and can be queried by device, and has provisions for making sure there is a version match with an interface specification. Out of sync driver and user space versions can be detected at runtime with this mechanism.

VMware is doing good things with the management API with respect to defining a standard around SMART reporting and it has great potential for device vendors to comply with. The biggest challenge will be getting device vendors on board with the appropriate partner licensing to deliver plugins that can remap or adapt their device to the SMART management interface.

How do we fix this?

The solution is NOT likely to be fixed for ATA variants, specifically SATA.  To my knowledge the SATA specification is not evolving beyond SATA-3, and the focus for SSD technology going forward is on the NVME standard.  I’ve not (yet) evaluated the NVME specification for how well it has standardized its specification for SMART reporting (which is documented as the NVMe log).  However, in browsing its definitions they are much more suited to finer grained detail and predictability in understanding the statistics for “behind the scenes” tasks that a drive may be doing in any given SSD.  The question I still have to answer is “what kind of challenges are device manufacturers facing when it comes to interpreting the specification?” How much room is there for error or simple mis-understanding.

As for software interfaces, there are still no standards around NVME for how to gain access to the NVME log.  This means that it is up to operating systems vendors to own the “standardization” of how a management application gains access to request and interpret the NVME log data; oh and still co-exist with existing SAS / SATA equivalents. VMware is getting there with its SMART management interface, and it would be nice to see the other two big OS vendors getting on board with something similar.

IMHO, without a NVME “software” standard, we could end up heading right where we left off with ATA SMART Reporting…  The best answer is for operating systems vendors to get to together and define a software standard around NVME to bridge the gap between device manufacturer “interpretation”, OEM device differentiation, and NVME as a specification rather than a full standard!

About dedwards

Lots of solid state storage experience, ranging from firmware, to drivers to web management interfaces, AHCI, NVMe and custom controllers. Latest endeavors include vmware vSphere and Virtual SAN all-flash! View all posts by dedwards

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: